Lipophilic constituents from two processed products and three different parts of Changium smyrnioides Wolff.

This article reports the lipophilic chemical composition of different processed products (Changii Radix, Changii Radix Alba) and parts (root bark, leaf and fruit) of Changium smyrnioides Wolff.. The lipophilic constituents were extracted with petroleum ether in Soxhlet apparatus, subsequently identified and determined by gas chromatography–mass spectroscopy (GC–MS). Yield of lipophilic constituents from Changii Radix (3.65%) was about three times more than Changii Radix Alba's (1.07%), which indicated processing by boiling in water had an impact on the content of lipophilic constituents. Moreover, the major compounds in different processed products and parts were found to be fatty acids and sesquiterpenes. The results are a contribution for the lipophilic chemical composition and can serve as a reference for product development of Changium smyrnioides Wolff..     

Preparation of 17β‐estradiol‐imprinted material by surface‐initiated atom transfer radical polymerization and its application

A novel 17β‐estradiol molecularly imprinted polymer was grafted onto the surface of initiator‐immobilized silica by surface‐initiated atom transfer radical polymerization. The resulting molecularly imprinted polymer was characterized by elemental analysis and thermogravimetric analysis. The binding property of molecularly imprinted polymer for 17β‐estradiol was also studied with both static and dynamic methods. The results showed that the molecularly imprinted polymer possessed excellent recognition capacity for 17β‐estradiol (180.65 mg/g at 298 K), and also exhibited outstanding selectivity for 17β‐estradiol over the other competitive compounds (such as testosterone and progesterone). Then, the determination of trace 17β‐estradiol in beef samples was successfully developed by using molecularly imprinted polymer solid‐phase extraction coupled with high‐performance liquid chromatography. The limit of detection was 0.25 ng/mL, and the amount of 17β‐estradiol in beef samples was detected at 2.83 ng/g. This work proposed a sensitive, rapid, reliable, and convenient approach for the determination of trace 17β‐estradiol in complicated beef samples.     

Selective adsorption of metronidazole on conjugated microporous polymers

Conjugated microporous polymers (CMPs) have recently received extensive attention in oil/organic solvent-water separation field as a kind of ideal porous absorbents with tunable porosity, large surface areas, and super-hydrophobicity. However, reports on the application of CMPs in adsorption of hydrophilic contaminants from water are very few. In this work, we studied the adsorption of metronidazole (MNZ), a polar antibiotic, by two kinds of CMPs. The adsorption characteristics of MNZ by the CMPs, including adsorption kinetics, mechanism, and isotherm parameters were calculated. The adsorption kinetics of MNZ was well expressed by the pseudo-second-order model, and the adsorption process was found to be mainly controlled by film diffusion. The adsorption isotherm data agreed well with the Langmuir isotherm model, and the values of free energy E indicated that the adsorption nature of MNZ on the CMPs was physisorption. Increasing dispersion degree of the CMPs in MNZ solution resulted in greater adsorption. This work may provide fundamental guidance for the removal of antibiotics by CMPs.     

Luminescent Nanofibers Fabricated from Phenanthroimidazole Derivatives by Organogelation: Fluorescence Response towards Acid with High Performance

Nanofibers based on phenanthroimidazole derivatives PCC , PDC , and PSC were fabricated by organogelation processes, and their fluorescence sensory properties towards acid were investigated. It was found that the emission of PCC in the nanofiber‐based film could be quenched significantly upon exposure to gaseous TFA due to the formation of protonated PCC , in which ICT (intramolecular charge transfer) would occur. On the other hand, TFA vapor led to the emitting colors of PDC and PSC in the nanofiber‐based films to turn to yellow and green from sky blue and blue, respectively. Additionally, we found that the decay times of PCC were 0.1 s and 1.9 s in probing the saturated vapor of TFA in nanofiber‐based film and in spin‐coated film, respectively. The results suggested that the high surface‐to‐volume ratio and large interspace in the nanofiber‐based networks favored the enhanced adsorption, accumulation, and diffusion of gaseous molecules, resulting in such a high performance.     

Preparation and Electrochemical Properties of Tin–Iron–Carbon Nanocomposite as the Anode of Lithium‐Ion Batteries

Tin–iron–carbon nanocomposite is successfully prepared by a sol–gel method followed by a chemical vapor deposition (CVD) process with acetylene gas as the carbon source. The structural properties, morphology, and electrochemical performances of the nanocomposite are comprehensively studied in comparison with those properties of tin–carbon and iron–carbon nanocomposites. Sheet‐like carbon architecture and different carbon contents are induced thanks to the catalytic effect of iron during CVD. Among three nanocomposites, tin–iron–carbon demonstrates the highest reversible capacity of 800 mA h g^?1 with 96.9 % capacity retention after 50 cycles. It also exhibits the best rate capability with a discharge capacity of 420 mA h g^?1 at a current density of 1000 mA g^?1. This enhanced performance is strongly related to the carbon morphology and content, which can not only accommodate the large volume change, but also improve the electronic conductivity of the nanocomposite. Hence, the tin–iron–carbon nanocomposite is expected to be a promising anode for lithium‐ion batteries.     

Existence of three solutions for quasilinear elliptic equations: an Orlicz-Sobolev space setting

In this paper, we establish the existence of three weak solutions for quasilinear elliptic equations in an Orlicz-Sobolev space via an abstract result recently obtained by Ricceri in [13].     

On the decay and blow‐up of solution for coupled nonlinear wave equations with nonlinear damping and source terms

In this work, we consider a nonlinear coupled wave equations with initial‐boundary value conditions and nonlinear damping and source terms. Under suitable assumptions on the damping terms and source terms and initial data in the stable set, we obtain that the decay estimates of the energy function is exponential or polynomial by using Nakao's method. By using the energy method, we obtain the blow‐up result of solution with some positive or nonpositive initial energy. Copyright © 2016 John Wiley & Sons, Ltd.     

光触发自修复聚合物研究进展

近几年,由于光触发自修复聚合物具有可控快速等优势,其在自修复聚合物领域中占据了重要的地位。光触发自修复聚合物实现自修复的方法主要分为3类,分别是基于光交联反应的自修复、基于光触发交换反应的自修复和基于光热效应的自修复。本文主要从光触发自修复聚合物的修复机制以及修复过程中涉及的化学本质两个方面,重点阐述了上述3类光触发自修复方法的最新研究进展,强调3种光触发自修复之间的联系和共同点。同时,对光触发自修复聚合物未来的发展前景进行了展望。     

惰气脉冲熔融热导法测定铌钛合金中氢含量

为准确测定铌钛合金中氢含量,使用LECO-404氢分析仪,采用惰性气氛脉冲加热熔融试样,热导法测定。研究了不同的脱气功率对空白值和试样分析值的影响,选择了脱气功率为4 500 W。通过助熔剂实验,选择了0.50g锡作为铌钛合金中氢释放的助熔剂。验证了钛标准样品的适用性。确定了分析功率为3 500 W,最短积分时间为60s。精密度实验中氢含量测定的相对标准偏差(RSD)为2.5%~5.5%,加标回收率为97.82%~104.5%,可以准确测定铌钛合金中氢含量。研究结果对准确测定铌钛合金中氢含量具有指导意义。